Visible-light-driven photocatalytic PVDF-TiO2/CNT/BiVO4 hybrid nanocomposite ultrafiltration membrane for dairy wastewater treatment

Enhancing the performance of polymeric membranes by nanomaterials has become of great interest in the field of membrane technology. The present work aimed to fabricate polyvinylidene fluoride (PVDF)–hybrid nanocomposite membranes and modify them with TiO2 and/or BiVO4 nanoparticles and/or carbon nanotubes (CNTs) in various ratios. Their photocatalytic performance under visible light was also investigated. All modified PVDF membranes exhibited higher hydrophilicity (lower contact angle of water droplets) than that of the neat membrane used as a reference. The membranes were characterized by using bovine serum albumin (BSA) as model dairy wastewater. The hybrid membranes had better antifouling properties as they had lower irreversible filtration resistance than that of the neat membrane. Hybrid PVDF membranes containing TiO2/CNT/BiVO4 showed the highest flux and lowest irreversible resistance during the filtration of the BSA solution. PVDF-TiO2/BiVO4 had the highest flux recovery ratio under visible light (70% for the PVDF mixed with 0.5% TiO2 and 0.5% BiVO4). The hydrophilicity of membrane surfaces increased with the incorporation of nanoparticles, preventing BSA to bind to the surface. This resulted in a slight decrease in BSA and chemical oxygen demand rejections, which were still above 97% in all cases. [Display omitted] •Photocatalytic PVDF-TiO2/CNT, PVDF-TiO2/BiVO4 and PVDF-TiO2/CNT/BiVO4 hybrid membranes were fabricated and characterized.•Membranes exhibited good flux and antifouling property; PVDF-TiO2/CNT/BiVO4 membranes had the best antifouling property.•BSA rejection of PVDF-TiO2/CNT/BiVO4 surpassed 97% under high water flux (150.52 L m−2 h−1).•Hybrid photocatalytic membranes showed good photocatalytic regeneration performance under visible light, PVDF-TiO2/BiVO4 provided the best, 70% flux recovery ratio.