On the noise behavior of a SAW convolver used as a matched filter

On the noise behavior of a SAW convolver used as a matched filter

The noise behavior of a surface acoustic wave convolver used as an analog matched filter is investigated in this paper. In contrast to the existing literature, the influence of noise processes with squared amplitudes is not neglected. It is shown that these quadratic noise contributions have a signi...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on microwave theory and techniques 2001-04, Vol.49 (4), p.779-786
1. Verfasser: Ostermayer, G.
Format: Artikel
Sprache:eng
Schlagworte:
Acoustic noise
Acoustic waves
Convolvers
Matched filters
Mathematical analysis
Microwaves
Modulation
Modulation coding
Noise
Noise level
Noise levels
Phase modulation
Phase shift keying
Signal to noise ratio
Surface acoustic waves
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The noise behavior of a surface acoustic wave convolver used as an analog matched filter is investigated in this paper. In contrast to the existing literature, the influence of noise processes with squared amplitudes is not neglected. It is shown that these quadratic noise contributions have a significant influence on the output signal-to-noise ratio (SNR) of the convolver for values of input SNR lower than 10 dB. The calculation is done for on-off keying coded signals but the results are also valid for other modulation schemes, e.g., phase shift keying.
ISSN:0018-9480
1557-9670
DOI:10.1109/22.915464