Nanoparticle engineering and control of tin oxide microstructures for chemical microsensor applications

The use of metal nanoparticles as seed layers for controlling the microstructures of tin oxide (SnO2) films on temperature controllable micromachined platforms is investigated. The study is focused on SnO2 due to its importance in the field of chemical microsensors. Nanoparticle seeds of iron, cobalt, nickel, copper and silver were formed by vapor deposition on the microhotplates followed by annealing at 500 C prior to self-aligned SnO2 deposition. Significant control of SnO2 grain sizes, ranging between 20 and 121 nm, was achieved depending on the seed-layer type. A correlation was found between decreasing the SnO2 grain size and increasing the melting temperature of the seed-layer metals, suggesting the use of high temperature metals as being appropriate choices as seed layers for obtaining a smaller SnO2 grain structure. Smaller grain diameters resulted in high sensitivity in 90 ppm ethanol, illustrating the benefits of nanoparticle seeding for chemical sensing. The initial morphology, particle size, and distribution of the seed layers were found to dictate the final SnO2 morphology and grain size. This paper demonstrates not only the possibility of depositing nanostructured oxide materials for chemical microsensor applications, but also the feasibility of conducting combinatorial research into nanoparticle growth using temperature controllable microhotplate platforms. This paper also shows the possibility of using multi-element arrays to form a range of different types of devices that could be used with suitable olfactory signal processing techniques in order to identify a variety of gases. (Author)