Incorporating Ag@RF core-shell nanomaterials into the thin film nanocomposite membrane to improve permeability and long-term antibacterial properties for nanofiltration

Ag@resorcinol-formaldehyde resin (Ag@RF) core-shell nanomaterials were prepared by Stöber method, and introduced into polyamide (PA) selective layer of thin-film nanocomposite (TFN) membranes through the interfacial polymerization (IP) process. Due to the abundant hydroxyl groups on the surface and suitable particle size, Ag@RF nanoparticles (Ag@RFs) could be uniformly dispersed in the piperazine aqueous solution and participate in the IP process to precisely regulate the microstructure of the PA selective layer. The resulting “crater structure” and irregular granular structure enlarged the permeable area and contributed to the surface hydrophilicity. For the nanofiltration application, the water flux of TFN membrane modified by Ag@RFs to Na2SO4 solution reached 150 L·m−2·h−1 which was 87.5% greater than TFC, and salt rejection was maintained. The antibacterial efficiency of the prepared TFN membrane on E. coli reached 99.6% in the antibacterial experiment. In addition, due to the special structure of Ag@RFs, the TFN membrane also showed an expected slow-release capability of Ag+, allowing for long-term anti-biofouling properties. This work demonstrates that Ag@RF core-shell nanoparticles with high compatibility of organic nanoparticles and antibacterial properties of Ag nanoparticles could be used as promising nanofillers for designing functional nanofiltration TFN membranes. [Display omitted] •Ag@resorcinol-formaldehyde (Ag@RF) resin was synthesized by modified Stöber method.•The microstructure of polyamide layer is regulated by Ag@RF nanofillers.•The Ag+ release rate of the TFN membrane is stable and controllable.•The separation and anti-biofouling properties of TFN NF membrane are improved.