Coating carbon fibers with a thermoplastic polyimide using aqueous foam

Many techniques have been developed to coat carbon fibers with thermoplastic resins to form a prepreg. These techniques include melt impregnation and solution/slurry coating. The applicability of these techniques, however, may be restricted by high melt viscosities or significant drying times. Recent emphasis has been towards a dry powder coating technique using a fluidized bed. This technique may be limited by difficulties in fluidization of the polymer powders. To overcome these difficulties, a technique has been developed to continuously coat carbon fibers with thermoplastic resins using aqueous foam as a carrier medium. The polymer is slurried in a surfactant solution, into which air is dispersed using a foam‐generating device. A predetermined amount of this foam is then applied to a moving carbon fiber tow using a foam application unit. The tow is then pulled through ovens where the foam is collapsed and the power fused to the fibers. Other aspects that are addressed include the stability of foams in the presence of powders, the mechanical properties of the composites formed using foam prepregging, and the effect of surfactant on composite properties.