Quantification of the toughness distribution in a heavy section submerged arc multilayer reactor pressure vessel weldment

In a working procedure qualification test weld representing a heavy section circumferential reactor pressure vessel (RPV) weld tested in 1968, lower toughness values were observed in the top layer region compared to those found in the filler region. Gleeble simulation, extensive microscopic evaluation, diligent Charpy V-notch testing and modelling of the bead sequence and distribution of alloying elements was applied to explain this effect. It could be revealed that the microstructure of the weld metal is the most important factor influencing the toughness. When an 'as welded' microstructure is partly or fully reaustenitised by the adjacent multilayer beads, the microstructure transforms and the toughness increases. In the filter region, 85% of the cross-section consists from transformed microstructure, whereas in the top layer only 20% are transformed. It is quite evident that, accidentally, the notch tip of Charpy samples in 1968 were placed in untransformed microstructures. When the top layer on the inner surface of the RPV is weld cladded by austenitic stainless steel, full transformation occurs and the toughness representing the filler region can be taken into account for safety evaluations. Material: 22NiMoCr37 (A508) nickel chromium molybdenum high strength steel.