Iron/titanium oxide-biochar (Fe2TiO5/BC): A versatile adsorbent/photocatalyst for aqueous Cr(VI), Pb2+, F- and methylene blue

[Display omitted] This is the first report of the metal Fe-Ti oxide/biochar (Fe2TiO5/BC) composite for simultaneous removal of aqueous Pb2+, Cr6+, F- and methylene blue (MB). Primary Fe2TiO5 nano particles and aggregates were dispersed on a high surface area Douglas fir BC (∼700 m2/g) by a simple chemical co-precipitation method using FeCl3 and TiO(acac)2 salts treated by base and heated to 80 °C. This was followed by calcination at 500 °C. This method previously was used without BC to make the neat mixed oxide Fe2TiO5, exhibiting a lower energy band gap than TiO2. Adsorption of Cr(VI), Pb(II), fluoride, and MB on Fe2TiO5/BC was studied as a function of pH, equilibrium time, initial adsorbate concentration, and temperature. Adsorption isotherm studies were conducted at 5, 25, and 45 ℃ and kinetics for all four adsorbates followed the pseudo second order model. Maximum Langmuir adsorption capacities for Pb2+, Cr6+, F- and MB at their initial pH values were 141 (pH 2), 200 (pH 5), 36 (pH 6) and 229 (pH 6) mg/g at 45 ℃ and 114, 180, 26 and 210 mg/g at 25 ℃, respectively. MB was removed from the water on Fe2TiO5/BC by synergistic adsorption and photocatalytic degradation at pH 3 and 6 under UV (365 nm) light irradiation. Cr6+, Pb2+, F-, and MB each exhibited excellent removal capacities in the presence of eight different competitive ions in simulated water samples. The removal mechanisms on Fe2TiO5/BC and various competitive ion interactions were proposed. Some iron ion leaching at pH 3 catalyzed Photo-Fenton destruction of MB. Fe2TiO5, BC, and Fe2TiO5/BC bandgaps were studied to help understand photocatalysis of MB and to advance supported metal oxide photodegradation using smaller energy band gaps than the larger bandgap of TiO2 for water treatment. A long range goal is to photocatalytically destroy some sorbates with adsorbents to avoid the need for regeneration steps.