Effects of carboxymethyl cellulose/pectin coating combined with ultrasound pretreatment before drying on quality of turmeric (Curcuma longa L.)

Turmeric is an herb with multiple bioactive substances and health benefits. Drying is one of the most important steps of its processing and sales. In order to obtain high-quality turmeric products, we used five different pretreatment methods to treat turmeric prior to pulse-spouted microwave vacuum drying (PSMVD), including carboxymethyl cellulose coating (CMC), pectin coating (P), ultrasound (US) and their combination (CMCUS or PUS). The effect of different pretreatments on the drying kinetics, quality attributes and microstructure of turmeric were evaluated. Results showed that the US pretreatment had the shortest drying time (60 min), while coating treatment did not significantly affect drying rate. Dried turmeric with coating pretreatment had lower rehydration ratio and water adsorption capacity compared with individual ultrasound treatment. Carboxymethyl cellulose coating protected bioactive substances better than pectin coating. Moreover, CMCUS pretreatment showed significantly lower total color change, higher curcumin content, total phenols and flavonoid content as well as antioxidant capacity in all dried samples. Microstructure observation showed that the polysaccharide coating covering the surface of turmeric might reduce the degradation of bioactive compounds. Therefore, the CMCUS pretreatment before PSMVD of turmeric was recommended due to the efficiency and quality protections. [Display omitted] •Ultrasound (US) pretreatment decreased the drying time and increased rehydration.•US combined coating pretreatment was proposed as a novel method before drying.•CMC coating combined with US (CMCUS) pretreatment improved the quality of turmeric.•Obvious differences in microstructure of different pretreatment samples were observed.•Coating pretreatment decreased the water adsorption and rehydration capacity.