Buckypaper–Bilirubin Oxidase Biointerface for Electrocatalytic Applications: Buckypaper Thickness

Electrode materials play an important role on the electrocatalytic properties of immobilized biocatalysts. In this regard, achieving direct electronic communication between the electrode and redox sites of biocatalysts eliminates the need for additional electron transfer mediators for biocatalytic applications in fuel cells and other electrochemical energy devices. In order to increase electrocatalytic currents and power in fuel cells and metal–air batteries, conductive carbon-nanostructure-modified large surface area electrodes are quite useful. Among various electrode materials, freestanding buckypapers made from carbon nanotubes have gained significance as they do not require a solid support material and thus facilitate miniaturization. In this article, we present the effect of buckypaper (BP) thickness on the electrocatalytic properties of a bilirubin oxidase (BOD) enzyme. In this study, we prepared BPs of varying thicknesses ranging from 87 μm, the minimum thickness for suitable handling with a good stability in aqueous experiments, to 380 μm. BOD was adsorbed overnight onto the BPs, mostly via hydrophobic and π–π interactions since the nanotubes used were not chemically functionalized. Furthermore, intercalation of the BOD molecules onto the nanotubes’ multicylindrical network is feasible. We determined that the lower range BP thickness (10 mV s–1) in oxygen-saturated buffer, which is identified to be driven by an ∼3.5 times faster electron transfer rate from the buckypaper to the T2/T3 center than the T1 Cu site. Findings from this study are significant for designing enzyme electrocatalytic systems and biosensors in general and fuel cells and aerobic energy storage devices in particular, where the cathodic oxygen reduction current is often inadequate.