Laser machined micropatterns as corrosion protection of both hydrophobic and hydrophilic magnesium

Magnesium and its alloys are promising candidate materials for medical implants because they possess excellent biocompatibility and mechanical properties comparable to bone. Furthermore, secondary surgical operations for removal could be eliminated due to magnesium's biodegradability. However, magnesium's degradation rate in aqueous environments is too high for most applications. It has been reported that hydrophobic textured surfaces can trap a surface gas layer which acts as a protective barrier against corrosion. However, prior studies have not investigated separately the role of the texture and hydrophobic treatments on magnesium corrosion rates. In this study, pillar-shaped microstructure patterns were fabricated on polished high purity magnesium surfaces by ablation with a picosecond laser. Some micropatterned samples were further processed by stearic acid modification (SAM). Micropatterned surfaces with SAM had hydrophobic properties with water droplet contact angles greater than 130°, while the micropatterned surfaces without SAM remained hydrophilic. The corrosion properties of textured and smooth magnesium surfaces in saline solution were investigated using electrochemical impedance spectroscopy (EIS) and optical microscopy. Corrosion rates on both hydrophobic and hydrophilic laser machined surfaces were reduced ∼90% relative to polished surfaces. Surprisingly, corrosion rates were similar for both hydrophobic and hydrophilic surfaces. Indirect evidence of local alkalization near microstructures was found and was hypothesized to stabilize the Mg(OH)2 layer, thereby inhibiting corrosion on hydrophilic surfaces. This is different than the corrosion resistance mechanism for superhydrophobic surfaces which makes use of gas adhesion at the liquid solid interface. These results suggest additional processing to render the magnesium hydrophobic is not necessary since it does not significantly enhance the corrosion resistance beyond what is conferred by micropatterned textures. [Display omitted] •Laser machining and hydrophobic treatment were investigated for trapping evolved hydrogen gas to inhibit magnesium corrosion.•Hydrophobic treatment stabilized gas bubble adhesion, but did not enhance corrosion resistance.•Laser texturing reduced the magnesium corrosion rate in saline >10-fold compared to polished surfaces.•Electrochemical impedance changes after agitation suggest local alkalinization in trenches possibly reduced corrosion.