Controllable Frontal Polymerization and Spontaneous Patterning Enabled by Phase‐Changing Particles

Frontal polymerization provides a rapid, economic, and environmentally friendly methodology to manufacture thermoset polymers and composites. Despite its efficiency and reduced environmental impact, the manufacturing method is underutilized due to the limited fundamental understanding of its dynamic control. This work reports the control and patterning of the front propagation in a dicyclopentadiene resin by immersion of phase‐changing polycaprolactone particles. Predictive and designed patterning is enabled by multiphysical numerical analyses, which reveal that the interplay between endothermic phase transition, exothermic chemical reaction, and heat exchange govern the temperature, velocity, and propagation path of the front via two different interaction regimes. To pattern the front, one can vary the size and spacing between the particles and increase the number of propagating fronts, resulting in tunable physical patterns formed due to front separation and merging near the particles. Both single‐ and double‐frontal polymerization experiments in an open mold are performed. The results confirm the front–particle interaction mechanisms and the shapes of the patterns explored numerically. The present study offers a fundamental understanding of frontal polymerization in the presence of heat‐absorbing second‐phase materials and proposes a potential one‐step manufacturing method for precisely patterned polymeric and composite materials without masks, molds, or printers. Herein, it is demonstrated that immersing phase‐changing particles with heat absorption capabilities into the resin is a rational route to control the front trajectory, velocity, and temperature in frontal polymerization. The presence of the phase‐changing particles can lead to significant and designable physical patterns with different microstructures in the manufactured part by tuning the front separation and merging near the particles.