Emulsions stabilised with pectin-based microgels: investigations into the effect of pH and ionic strength on emulsion stability

Pectin-based microgel particles (MGPs) are encouraging sustainable emulsifying agents for food-applications. Based on polyelectrolytes, pectin-based MGPs are assumed to be pH and ionic strength sensitive, in a similar manner to MGPs of synthetic polymers. Besides building a barrier around oil droplets, charged MGPs repulse each other. Thus the stabilisation mechanisms of pectin-based MGPs should be both steric and electrostatic. To investigate this, emulsions were homogenised with MGP concentrations ranging from 0.5 to 2 wt% MGPs. After emulsification, the pH of the emulsions was adjusted to 4, 3, or 2; and the resulting droplet sizes were measured. We found out that the droplet size and the appearance of agglomerates increased with decreasing pH values. This was caused by the loss of the MGP surface charge, as stated by their ζ-potential, showing an increase from −33.71 ± 4.1 mV for samples with pH 4 to −17 ± 0.6 mV, and −3.4 ± 0.6 mV for pH 3 and 2, respectively. However, the degree of coalescence was dependent on the MGP concentration, as samples with 0.5 wt% coalesced more readily than samples with 2 wt% MGP. These results help understand the emulsion stabilisation mechanisms of pectin-based MGPs and what effect formulation parameters have on the long-term stability of MGP-stabilised emulsions. Pectin-based microgel particles (MGPs) are encouraging sustainable emulsifying agents for food-applications.