Layering of discolored substrates with high-value opaque composites for CAD-CAM monolithic ceramics

Severely discolored substrates have been shown to limit the use of computer-aided design and computer-aided manufacturing (CAD-CAM) ceramic blocks because they provide insufficient color masking. The purpose of the in vitro study was to evaluate the effect of a layer of high-value opaque composite resin over discolored substrates to determine its masking ability with CAD-CAM ceramics. Six ceramic groups (n=10) were tested. A bilayer group of zirconia and porcelain served as the control. The CAD-CAM monolithic groups were translucent zirconia, zirconia-reinforced lithium silicate, lithium disilicate, leucite-reinforced glass-ceramic, and feldspathic ceramic. Five substrates were used: A1 (used as reference), A3.5, C4, and coppery and silvery metals. The substrates were separated as nonlayered or layered (with flowable or restorative opaque composite resins). The tested luting agents were white, opaque, and A1. Color differences (ΔE00) were assessed with the CIEDE2000 formula. A 2-way ANOVA (α=.05) was used to detect significant differences in ΔE00 among the groups for each substrate. The results were compared with acceptability (1.77) and perceptibility (0.81) thresholds. The flowable composite resin layer associated with A1 luting agent ensured ΔE00 lesser the than perceptibility thresholdwith the use of CAD-CAM monolithic ceramics, with the lowest values for zirconia-reinforced lithium silicate in substrates A3.5 (0.53) and C4 (0.32) and for leucite-reinforced glass-ceramic for coppery (0.49) and silvery (0.81) substrates (P