Locating the rotator cable during subacromial arthroscopy: bursal- and articular-sided anatomy

The rotator cable (RCa) is an important articular-sided structure of the cuff capsular complex that helps prevent suture pull out during rotator cuff repairs (RCRs) and plays a role in force transmission. Yet, the RCa cannot be located during bursal-sided RCRs. The purpose of this study is to develop a method to locate the RCa in the subacromial space and compare its bursal- and articular-sided dimensions. In 20 fresh-frozen cadaveric specimens, the RCa was found from the articular side, outlined with stitches, and then evaluated from the bursal side using an easily identifiable reference point, the intersection of a line bisecting the supraspinatus (SS) tendon and posterior SS myotendinous junction (MTJ). Four bursal-sided lengths were measured on the SS-bisecting line as well as the RCa’s outside anteroposterior base. For the articular-sided measurements, the rotator cuff capsular complex was detached from bone and optically scanned creating 3D solid models. Using the 3D models, 4 articular-sided lengths were made, including the RCa’s inside and outside anteroposterior base. The RCa’s medial arch was located 9.9 ± 5.6 mm from the reference point in 10 intact specimens and 4.1 ± 2.4 mm in 10 torn specimens (P = .007). The RCa’s width was 10.9 ± 2.1 mm, and the distance from the lateral edge of the RCa to the lateral SS insertion was 13.9 ± 4.8 mm. The bursal- and articular-sided outside anteroposterior base measured 48.1 ± 6.4 mm and 49.6 ± 6.5 mm, respectively (P = .268). The average inside anteroposterior base measurement was 37.3 ± 5.9 mm. The medial arch of the RCa can be reliably located during subacromial arthroscopy using the reference point, analogous to the posterior SS MTJ. The RCa is located 10 mm in intact and 4 mm in torn tendons (P = .007) from the posterior SS MTJ. If the above 6-mm shift in location of the RCa is not taken into consideration during rotator cuff suture placement, it could negatively affect time zero repair strength. The inside anteroposterior base of the RCa measures on average 37 mm; therefore, rotator cuff tears measuring >37 mm are at risk of rupturing part or all of the RCa’s 2 humeral attachments, which if not recognized and addressed could impact postoperative function.