Selection and re-acclimation of bioprospected acid-tolerant green microalgae suitable for growth at low pH

For mass culture of photosynthetic green microalgae, industrial flue gases can represent a low-cost resource of CO 2 . However, flue gases are often avoided, because they often also contain high levels of SO 2 and/or NO 2 , which cause significant acidification of media to below pH 3 due to production of sulfuric and nitric acid. This creates an unsuitable environment for the neutrophilic microalgae commonly used in large-scale commercial production. To address this issue, we have looked at selecting acid-tolerant microalgae via growth at pH 2.5 carried out with samples bioprospected from an active smelter site. Of the eight wild samples collected, one consisting mainly of Coccomyxa sp. grew at pH 2.5 and achieved a density of 640 mg L −1 . Furthermore, three previously bioprospected green microalgae from acidic waters (pH 3–4.5) near abandoned mine sites were also re-acclimated down to their in-situ pH environment after approximately 4 years spent at neutral pH. Of those three, an axenic culture of Coccomyxa sp. was the most successful at re-acclimating and achieved the highest density of 293.1 mg L −1 and maximum daily productivity of 38.8 mg L −1 day −1 at pH 3. Re-acclimation of acid-tolerant species is, therefore, achievable when directly placed at their original pH, but gradual reduction in pH is recommended to give the cells time to acclimate.