CFD investigation on gas–solid two-phase flow of dust removal characteristics for cartridge filter: a case study

The filter cartridge dust collector has been widely used in industry, but the influence of its internal structure on its operation effects is rarely studied. FLUENT software was used to simulate the influence of different air volume and permeability values on the gas–solid two-phase flow of dust removal characteristics for a filter cartridge. The results show that when the air volume of the fan was greater than 1600 m 3 /h, the increase in the dust reduction rate was not obvious, and the high-velocity airflow filled the entire dust removal chamber, which was conducive to the filter using the largest effective filtration area to remove dust; the optimal air volume was 1600 m 3 /h. Furthermore, the dust removal effect gradually became worse when the porosity was higher than 0.65, but the fluidity of the internal air was poor when it was lower than 0.65. The optimum porosity was 0.65. A simulated validation analysis was conducted using the above optimal parameters. As the proportion of particles below 2 μm increased, the dust removal effect worsened.