Fabrication and characterization of 3,4-diaminobenzophenone-functionalized magnetic nanoadsorbent with enhanced VOC adsorption and desorption capacity

The present study, for the first time, utilized 3,4-diaminobenzophenone (DABP)-functionalized Fe 3 O 4 /AC@SiO 2 (Fe 3 O 4 /AC@SiO 2 @DABP) magnetic nanoparticles (MNPs) synthesized as a nanoadsorbent for enhancing adsorption and desorption capacity of gaseous benzene and toluene as volatile organic...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Environmental science and pollution research international 2021-02, Vol.28 (5), p.5231-5253
Hauptverfasser: Şahin, Ömer, Kutluay, Sinan, Horoz, Sabit, Ece, Mehmet Şakir
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The present study, for the first time, utilized 3,4-diaminobenzophenone (DABP)-functionalized Fe 3 O 4 /AC@SiO 2 (Fe 3 O 4 /AC@SiO 2 @DABP) magnetic nanoparticles (MNPs) synthesized as a nanoadsorbent for enhancing adsorption and desorption capacity of gaseous benzene and toluene as volatile organic compounds (VOCs). The Fe 3 O 4 /AC@SiO 2 @DABP MNPs used in adsorption and desorption of benzene and toluene were synthesized by the co-precipitation and sol-gel methods. The synthesized MNPs were characterized by SEM, FTIR, TGA/DTA, and BET surface area analysis. Moreover, the optimization of the process parameters, namely contact time, initial VOC concentration, and temperature, was performed by applying response surface methodology (RSM). Adsorption results demonstrated that the Fe 3 O 4 /AC@SiO 2 @DABP MNPs had excellent adsorption capacity. The maximum adsorption capacities for benzene and toluene were found as 530.99 and 666.00 mg/g, respectively, under optimum process parameters (contact time 55.47 min, initial benzene concentration 17.57 ppm, and temperature 29.09 °C; and contact time 57.54 min, initial toluene concentration 17.83 ppm, and temperature 27.93 °C for benzene and toluene, respectively). In addition to the distinctive adsorptive behavior, the Fe 3 O 4 /AC@SiO 2 @DABP MNPs exhibited a high reproducibility adsorption and desorption capacity. After the fifth adsorption and desorption cycles, the Fe 3 O 4 /AC@SiO 2 @DABP MNPs retained 94.4% and 95.4% of its initial adsorption capacity for benzene and toluene, respectively. Kinetic and isotherm findings suggested that the adsorption mechanisms of benzene and toluene on the Fe 3 O 4 /AC@SiO 2 @DABP MNPs were physical processes. The results indicated that the successfully synthesized Fe 3 O 4 /AC@SiO 2 @DABP MNPs can be applied as an attractive, highly effective, reusable, and cost-effective adsorbent for the adsorption of VOC pollutants. Graphical abstract
ISSN:0944-1344
1614-7499
DOI:10.1007/s11356-020-10885-y