Influence of bone density, screw size and surgical procedure on orthodontic mini-implant placement – part A: temperature development

The aim of this in vitro study was to determine the influence of bone density, orthodontic mini-implant (OMI) size, and the surgical procedure on temperature increase during implant site osteotomy and placement. OMIs of different sizes (2.0×7, 2.3×7, 2.0×11, and 2.3×11mm) were placed in artificial b...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:International journal of oral and maxillofacial surgery 2021-04, Vol.50 (4), p.555-564
Hauptverfasser: Möhlhenrich, S.C., Heussen, N., Modabber, A., Kniha, K., Hölzle, F., Wilmes, B., Danesh, G., Szalma, J.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The aim of this in vitro study was to determine the influence of bone density, orthodontic mini-implant (OMI) size, and the surgical procedure on temperature increase during implant site osteotomy and placement. OMIs of different sizes (2.0×7, 2.3×7, 2.0×11, and 2.3×11mm) were placed in artificial bone blocks of different densities (D1–D4). Optionally, the drilling and insertion angle was 90° or 60° to the bone surface. A total of 640 OMIs were inserted, and predrilling was performed in 320 cases. All insertions were done without irrigation with an axial load of 20N, which resulted in 64 groups. Temperature measurements were performed during implant site preparation and placement using Type-K-thermocouples. Mean temperature increase differed for OMI osteotomy between 1.38°C and 8.75°C and placement between 3.8°C and 18.74°C, respectively. Critical thermal increase was especially reached during placement using long implants. Increasing bone density and implant size (diameter
ISSN:0901-5027
1399-0020
DOI:10.1016/j.ijom.2020.07.004