Groove Wear of Tools in NC Turning of Pure Nickel
This paper analyzes the cause of groove wear of tools in turning of pure nickel using scanning electron microscope (SEM), electron probe microanalyzer (EPMA) and auger electron spectroscopy (AES). Emphasis is put on the formation mechanism of groove wear. Also described in the paper is the experimen...
Gespeichert in:
| Veröffentlicht in: | CIRP annals 1986, Vol.35 (1), p.71-74 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | eng |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 74 |
|---|---|
| container_issue | 1 |
| container_start_page | 71 |
| container_title | CIRP annals |
| container_volume | 35 |
| creator | Tan, M.T. Zhang, Y.Z. |
| description | This paper analyzes the cause of groove wear of tools in turning of pure nickel using scanning electron microscope (SEM), electron probe microanalyzer (EPMA) and auger electron spectroscopy (AES). Emphasis is put on the formation mechanism of groove wear. Also described in the paper is the experimental investigation of the process to minimize and eliminate the groove wear of tools. |
| doi_str_mv | 10.1016/S0007-8506(07)61841-1 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_proquest_miscellaneous_24068304</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><els_id>S0007850607618411</els_id><sourcerecordid>24068304</sourcerecordid><originalsourceid>FETCH-LOGICAL-c319t-dc986ed5c8c024c3ae5db614fabc58f5807fab78eda4ff5a5151a388bfd41b0a3</originalsourceid><addsrcrecordid>eNqFUMFKAzEUzEHBWv0EYU-ih9X3usluehIpWoVSBSseQzZ5keh2U5Nuwb9324pXTzMMMwMzjJ0hXCFgef0CAFUuBZQXUF2WKDnmeMAGf_IRO07pA0AIqEYDhtMYwoayN9IxCy5bhNCkzLfZfJItutj69n0rP3eRsrk3n9ScsEOnm0Snvzhkr_d3i8lDPnuaPk5uZ7kpcLzOrRnLkqww0sCIm0KTsHWJ3OnaCOmEhKqnlSSruXNCCxSoCylrZznWoIshO9_3rmL46iit1dInQ02jWwpdUiMOpSyA90axN5oYUork1Cr6pY7fCkFtT1G7U9R2vepxd4rCPnezz1G_YuMpqmQ8tYasj2TWygb_T8MPbHxqPA</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>24068304</pqid></control><display><type>article</type><title>Groove Wear of Tools in NC Turning of Pure Nickel</title><source>Access via ScienceDirect (Elsevier)</source><creator>Tan, M.T. ; Zhang, Y.Z.</creator><creatorcontrib>Tan, M.T. ; Zhang, Y.Z.</creatorcontrib><description>This paper analyzes the cause of groove wear of tools in turning of pure nickel using scanning electron microscope (SEM), electron probe microanalyzer (EPMA) and auger electron spectroscopy (AES). Emphasis is put on the formation mechanism of groove wear. Also described in the paper is the experimental investigation of the process to minimize and eliminate the groove wear of tools.</description><identifier>ISSN: 0007-8506</identifier><identifier>DOI: 10.1016/S0007-8506(07)61841-1</identifier><language>eng</language><publisher>Elsevier Ltd</publisher><ispartof>CIRP annals, 1986, Vol.35 (1), p.71-74</ispartof><rights>1986 CIRP</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c319t-dc986ed5c8c024c3ae5db614fabc58f5807fab78eda4ff5a5151a388bfd41b0a3</citedby><cites>FETCH-LOGICAL-c319t-dc986ed5c8c024c3ae5db614fabc58f5807fab78eda4ff5a5151a388bfd41b0a3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://dx.doi.org/10.1016/S0007-8506(07)61841-1$$EHTML$$P50$$Gelsevier$$H</linktohtml><link.rule.ids>314,780,784,3550,4024,27923,27924,27925,45995</link.rule.ids></links><search><creatorcontrib>Tan, M.T.</creatorcontrib><creatorcontrib>Zhang, Y.Z.</creatorcontrib><title>Groove Wear of Tools in NC Turning of Pure Nickel</title><title>CIRP annals</title><description>This paper analyzes the cause of groove wear of tools in turning of pure nickel using scanning electron microscope (SEM), electron probe microanalyzer (EPMA) and auger electron spectroscopy (AES). Emphasis is put on the formation mechanism of groove wear. Also described in the paper is the experimental investigation of the process to minimize and eliminate the groove wear of tools.</description><issn>0007-8506</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1986</creationdate><recordtype>article</recordtype><recordid>eNqFUMFKAzEUzEHBWv0EYU-ih9X3usluehIpWoVSBSseQzZ5keh2U5Nuwb9324pXTzMMMwMzjJ0hXCFgef0CAFUuBZQXUF2WKDnmeMAGf_IRO07pA0AIqEYDhtMYwoayN9IxCy5bhNCkzLfZfJItutj69n0rP3eRsrk3n9ScsEOnm0Snvzhkr_d3i8lDPnuaPk5uZ7kpcLzOrRnLkqww0sCIm0KTsHWJ3OnaCOmEhKqnlSSruXNCCxSoCylrZznWoIshO9_3rmL46iit1dInQ02jWwpdUiMOpSyA90axN5oYUork1Cr6pY7fCkFtT1G7U9R2vepxd4rCPnezz1G_YuMpqmQ8tYasj2TWygb_T8MPbHxqPA</recordid><startdate>1986</startdate><enddate>1986</enddate><creator>Tan, M.T.</creator><creator>Zhang, Y.Z.</creator><general>Elsevier Ltd</general><scope>AAYXX</scope><scope>CITATION</scope><scope>8BQ</scope><scope>8FD</scope><scope>JG9</scope></search><sort><creationdate>1986</creationdate><title>Groove Wear of Tools in NC Turning of Pure Nickel</title><author>Tan, M.T. ; Zhang, Y.Z.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c319t-dc986ed5c8c024c3ae5db614fabc58f5807fab78eda4ff5a5151a388bfd41b0a3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1986</creationdate><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Tan, M.T.</creatorcontrib><creatorcontrib>Zhang, Y.Z.</creatorcontrib><collection>CrossRef</collection><collection>METADEX</collection><collection>Technology Research Database</collection><collection>Materials Research Database</collection><jtitle>CIRP annals</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Tan, M.T.</au><au>Zhang, Y.Z.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Groove Wear of Tools in NC Turning of Pure Nickel</atitle><jtitle>CIRP annals</jtitle><date>1986</date><risdate>1986</risdate><volume>35</volume><issue>1</issue><spage>71</spage><epage>74</epage><pages>71-74</pages><issn>0007-8506</issn><abstract>This paper analyzes the cause of groove wear of tools in turning of pure nickel using scanning electron microscope (SEM), electron probe microanalyzer (EPMA) and auger electron spectroscopy (AES). Emphasis is put on the formation mechanism of groove wear. Also described in the paper is the experimental investigation of the process to minimize and eliminate the groove wear of tools.</abstract><pub>Elsevier Ltd</pub><doi>10.1016/S0007-8506(07)61841-1</doi><tpages>4</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0007-8506 |
| ispartof | CIRP annals, 1986, Vol.35 (1), p.71-74 |
| issn | 0007-8506 |
| language | eng |
| recordid | cdi_proquest_miscellaneous_24068304 |
| source | Access via ScienceDirect (Elsevier) |
| title | Groove Wear of Tools in NC Turning of Pure Nickel |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-28T19%3A15%3A48IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Groove%20Wear%20of%20Tools%20in%20NC%20Turning%20of%20Pure%20Nickel&rft.jtitle=CIRP%20annals&rft.au=Tan,%20M.T.&rft.date=1986&rft.volume=35&rft.issue=1&rft.spage=71&rft.epage=74&rft.pages=71-74&rft.issn=0007-8506&rft_id=info:doi/10.1016/S0007-8506(07)61841-1&rft_dat=%3Cproquest_cross%3E24068304%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=24068304&rft_id=info:pmid/&rft_els_id=S0007850607618411&rfr_iscdi=true |