Printing of Hydrophobic Materials in Fumed Silica Nanoparticle Suspension

Freeform three-dimensional (3D) printing of functional structures from liquid hydrophobic build materials is of great significance and widely used in various fields such as soft robotics and microfluidics. In particular, a yield-stress support bath-enabled 3D-printing methodology has been emerging to fabricate complex 3D structures. Unfortunately, the reported support bath materials are either hydrophobic or not versatile enough for the printing of a wide range of hydrophobic materials. The objective of this study is to propose a fumed silica nanoparticle-based yield-stress suspension as a hydrophobic support bath to enable 3D extrusion printing of various hydrophobic ink materials in a printing-then-solidification fashion. Hydrophobic ink is freeform-deposited in a hydrophobic fumed silica-mineral oil suspension and maintains its shape during printing; it is not cured until the whole structure is complete. Various hydrophobic inks including poly­(dimethylsiloxane) (PDMS), SU-8 resin, and epoxy-based conductive ink are printed into complex 3D structures in the fumed silica-mineral oil bath and then cured using relevant cross-linking mechanisms, even at a temperature as high as 90 °C, to prove the feasibility and versatility of the proposed printing approach. In addition, the deposited feature can easily reach a much better resolution such as 30 μm for PDMS filaments due to the negligible interfacial tension effect.