Effect of layering gingiva-shade composite resin on the strength of denture base polymers

Acrylic resin denture base materials, fabricated with either a traditional technique or computer-aided design and computer-aided manufacturing (CAD-CAM) technique, layered with different thicknesses of gingiva-shade composite resin may affect the strength of the definitive prostheses and have not been investigated. The purpose of this in vitro study was to assess the flexural strength of acrylic resin denture base materials modified by layering different thicknesses of gingiva-shade composite resin. Two denture acrylic resins, heat-polymerized type (Lucitone 199) and CAD-CAM prepolymerized type (AvaDent) polymethyl methacrylate (PMMA) resin, were used as the base materials. Three-millimeter–thick specimens were fabricated and prepared according to the ISO 1567 and ISO 20795-1:2013 and were used as the controls. A proprietary gingiva-shade composite resin (GRADIA gum shades) was used to replace different thicknesses (0.5 mm, 1.0 mm, and 1.5 mm) of the denture base materials, giving 4 groups for each tested material (n=16). A 3-point loading test was conducted by using a universal testing machine and a custom fixture with a crosshead speed of 5 mm/min. The maximum fracture loads were recorded, and ultimate flexural strength values were calculated. The collected data were statistically analyzed with ANOVA and the Tukey honestly significant difference (HSD) tests (α=.05). Representative fractured specimens were examined under a stereomicroscope at ×20 magnification and a scanning electron microscope to determine the interface and fracture patterns. The mean ±standard deviation of ultimate flexural strengths for the heat-polymerized acrylic resin specimens ranged from 94.79 ±9.89 MPa to 40.34 ±12.79 MPa, and that of the CAD-CAM prepolymerized acrylic resin ranged from 125.98 ±7.96 MPa to 64.16 ±20.77 MPa. Acrylic resin denture base materials after layering with gingiva-shade composite resin had a significantly lower mean fracture load than the controls (P