SUSTAINABLE URBAN WEED CONTROL: EXPERIENCES OF NON-CHEMICAL WEED CONTROL (MANUAL LABOUR, MECHANICAL AND THERMAL-FLAME WEEDING) IN THE MUNICIPALITY OF OCCHIOBELLO, ITALY

In the middle of 2015, prior than the mediatic debate on glyphosate in Italy, the Municipality of Occhiobello, aiming at fully implement the “sustainable use of pesticides – PAN fitosanitari” legislation, took the decision to definitely abandon chemical weed control in application of a precautionary...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:WIT Transactions on Ecology and the Environment 2018-01, Vol.226, p.751
Hauptverfasser: Moretto, Filippo, DAVIDE DI DOMENICO
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:In the middle of 2015, prior than the mediatic debate on glyphosate in Italy, the Municipality of Occhiobello, aiming at fully implement the “sustainable use of pesticides – PAN fitosanitari” legislation, took the decision to definitely abandon chemical weed control in application of a precautionary principle. Uncontrolled weeds can cause problems on kerb channels and footways, damaging surface infrastructure and collecting litter. Adopting alternative methods to control weeds reduces the risks associated with herbicide use (e.g. storage, handling, use and disposal), but it can be costlier. Several areas of the municipal territory were treated with a non-chemical method and the results were assessed. Every involved area was classified according to the DEFRA (UK Department for Environment Food & Rural Affairs) weed level scale criteria and species before the treatment, in order to clarify the initial level of weeds both in slabs and asphalt streets. Experimental results demonstrated the level of efficacy of each treatment and its cost-effective ratio, and it was possible to identify a simple and effective graphic indicative of the case-specific necessary treatment. New achievements are expected by the end of 2017 when a whole season of both steam and flame thermal control will be concluded.
ISSN:1746-448X
1743-3541
DOI:10.2495/SDP170651