Surface Modification of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode Material by Tungsten Oxide Coating for Improved Electrochemical Performance in Lithium-Ion Batteries

Ni-rich NCM-based positive electrode materials exhibit appealing properties in terms of high energy density and low cost. However, these materials suffer from different degradation effects, especially at their particle surface. Therefore, in this work, tungsten oxide is evaluated as a protective inorganic coating layer on LiNi0.8Co0.1Mn0.1O2 (NCM-811) positive electrode materials for lithium-ion battery (LIB) cells and investigated regarding rate capability and cycling stability under different operation conditions. Using electrochemical impedance spectroscopy, the interfacial resistance of uncoated and coated NCM-811 electrodes is explored to study the impact of the coating on lithium-ion diffusion. All electrochemical investigations are carried out in LIB full cells with graphite as a negative electrode to ensure better comparability with commercial cells. The coated electrodes show an excellent capacity retention for the long-term charge/discharge cycling of NCM-811-based LIB full cells, i.e., 80% state-of-health after more than 800 cycles. Furthermore, the positive influence of the tungsten oxide coating on the thermal and structural stability is demonstrated using postmortem analysis of aged electrodes. Compared to the uncoated electrodes, the surface-modified electrodes show less degradation effects, such as particle cracking on the electrode surface and improvement of the thermal stability of NCM-811 in the presence of electrolyte.