Study of Immersion of LiNi0.5Mn0.3Co0.2O2 Material in Water for Aqueous Processing of Positive Electrode for Li-Ion Batteries

The understanding of the phenomena occurring during immersion of LiNi0.5Mn0.3Co0.2O2 (NMC) in water is helpful to devise new strategies toward the implementation of aqueous processing of this high-capacity cathode material. Immersion of NMC powder in water leads to both structural modification of th...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:ACS applied materials & interfaces 2019-05, Vol.11 (20), p.18331-18341
Hauptverfasser: Bichon, Marie, Sotta, Dane, Dupré, Nicolas, De Vito, Eric, Boulineau, Adrien, Porcher, Willy, Lestriez, Bernard
Format: Artikel
Sprache:eng
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The understanding of the phenomena occurring during immersion of LiNi0.5Mn0.3Co0.2O2 (NMC) in water is helpful to devise new strategies toward the implementation of aqueous processing of this high-capacity cathode material. Immersion of NMC powder in water leads to both structural modification of the particles surface as observed by high-resolution scanning transmission electron microscopy and the formation of lithium-based compounds over the surface (LiOH, Li2CO3) in greater amount than after long-time exposure to ambient air, as confirmed by pH titration and 7Li MAS NMR analysis. The surface compounds adversely affect the electrochemical performance and are notably responsible for the alkaline pH of the aqueous slurry, which causes corrosion of the aluminum collector during coating of the electrode. The corrosion is avoided by adding phosphoric acid to the slurry as it lowers the pH, and it also enhances the cycling stability of the water-based electrodes due to the phosphate compounds formed at the particles surface, as evidenced by X-ray photoelectron spectroscopy analysis.
ISSN:1944-8244
1944-8252
DOI:10.1021/acsami.9b00999