Development of mechanically compliant 3D composite scaffolds for bone tissue engineering applications

Cancellous bone region of the human native bone has the potential to bear significant mechanical loads. However, due to the following parameters such as low trabecular volume, more porosity, less thickness and more interconnectivity, cancellous bone is accessible to damage in accidents or when aging. This research led to the effective fabrication and engineering of cancellous region of the bone for its application in reconstruction or filling of bone voids after resection of large tumor mass. Scaffolds containing hydroxyapatite (HAp), polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) (5% polymer and HAp concentrations) at different HAp: polymer composite ratios (50:50, 70:30 and 80:20), were fabricated by freeze–drying method using only water as solvent and ribose as crosslinker for the scaffolds. The fabricated scaffolds were characterized for its mechanical (compressive) strength, chemical properties using FT‐IR and XRD analyses, swelling and degradation studies, confirmation of mineralization process by immersion in simulated body fluid (SBF) for 7, 15 and 30 days, morphological analysis using scanning electron microscopy (SEM), and biocompatibility properties by performing MTT analysis. From the combined interpretation of the above mentioned tests, it was proven that 80:20 ratio of HAp to polymers was found to be the most suitable scaffold in terms of its optimal properties for its use as bone graft material for trabecular bone. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 3267–3274, 2018.