Rock moisture measurements: techniques, results, and implications for weathering

Rock moisture is an important factor for the intensity and distribution of frost weathering processes. However, quantitative measurements are scarce, which is partly due to the lack of reliable measurement techniques. This paper presents five different techniques for obtaining rock moisture data. While collecting rock pieces and two‐dimensional geoelectric measurements allow determination of the spatial moisture distribution, the temporal variability can be derived from conductivity and time domain reflectometry records. Computer simulations, using rock properties and climatic records as input data, render it possible to clarify the important aspects that are responsible for the moisture distribution. It proved to be advisable to use several methods to check and validate the results. The results, obtained in study areas in the Bavarian Alps, make it clear that direct rainfall is the main source of rock moisture. The influence of snow is limited to the immediate vicinity of the snow fields and is not equally pronounced at different times and positions. Rock moisture levels are higher in summer than they are in winter, since in winter less water is supplied in liquid form. Northerly exposed rockwalls are generally more moist than those exposed in a southerly direction, which is due to the different insolation as well as to the wind direction during rainfall. In every position the rock is, on average, wetter on the inside than it is on the surface. This means that shallow frost cycles, as typical for south‐exposed sites, are not affecting weathering, since they take place at a depth level that is mostly dried out. Numerous spatial and temporal patterns of rockfall found in the same study areas can be explained through variations in rock moisture. Thus, the moisture content of the rock is considered to be one of the major controlling factors of the frost‐shattering rate. Copyright © 2005 John Wiley & Sons, Ltd.