AN EMPIRICAL STUDY: THE IMPACT OF THE NUMBER OF USERS ON ELECTRIC FIELD STRENGTH OF WIRELESS COMMUNICATIONS

Abstract As a result of the drastic increase in the number of mobile device users, there is considerable public debate about possible health hazards especially due to base stations and Wi-Fi access points. For this reason, in this study the effects of the number of users in a base station and wirele...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Radiation protection dosimetry 2018-12, Vol.182 (4), p.494-501
Hauptverfasser: Kurnaz, Cetin, Korunur Engiz, Begum, Kose, Ugur
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Abstract As a result of the drastic increase in the number of mobile device users, there is considerable public debate about possible health hazards especially due to base stations and Wi-Fi access points. For this reason, in this study the effects of the number of users in a base station and wireless fidelity (Wi-Fi) access point on electric field strength (E) levels were investigated using real-time measurements. Two-stage E measurements were performed on Ondokuz Mayıs University’s (OMU) Kurupelit Campus with a PMM-8053 and SRM-3006 electromagnetic field (EMF) meter. In the first stage, 24-h measurements were performed with PMM-8053 at the location where the maximum E was measured and from which the busiest times of the day were then determined. The relationship among band selective E values was assessed using the number of users per minute provided by three cellular system operators for the location. Upper and lower bounds of E according to the number of users were calculated, and then an empirical model that helps calculate the E of medium with 86% accuracy was proposed. In the second stage, the effect of the number of users in a Wi-Fi access point on E level was investigated. For this purpose, the measurement environment was set as including one Wi-Fi access point with needed measurement devices. The number of users was increased as per user per minute. The number of users was validated with the data obtained from OMU IT Department. Using the measurement result, a model with a 96% accuracy between the E value in the environment and the number of users accessing the Wi-Fi system is proposed. With the use of these models, E level in the medium can be determined without using any EMF meters, thus precautions can be taken to stay within regulatory limits.
ISSN:0144-8420
1742-3406
DOI:10.1093/rpd/ncy107