Interdigitated array microelectrode based impedance biosensor coupled with magnetic nanoparticle–antibody conjugates for detection of Escherichia coli O157:H7 in food samples
An impedance biosensor based on interdigitated array microelectrode (IDAM) coupled with magnetic nanoparticle–antibody conjugates (MNAC) was developed and evaluated for rapid and specific detection of E. coli O157:H7 in ground beef samples. MNAC were prepared by immobilizing biotin-labeled polyclona...
Gespeichert in:
Veröffentlicht in: | Biosensors & bioelectronics 2007-05, Vol.22 (11), p.2408-2414 |
---|---|
Hauptverfasser: | , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | An impedance biosensor based on interdigitated array microelectrode (IDAM) coupled with magnetic nanoparticle–antibody conjugates (MNAC) was developed and evaluated for rapid and specific detection of
E. coli O157:H7 in ground beef samples. MNAC were prepared by immobilizing biotin-labeled polyclonal goat anti-
E. coli antibodies onto streptavidin-coated magnetic nanoparticles, which were used to separate and concentrate
E. coli O157:H7 from ground beef samples. Magnitude of impedance and phase angle were measured in a frequency range of 10
Hz to 1
MHz in the presence of 0.1
M mannitol solution. The lowest detection limits of this biosensor for detection of
E. coli O157:H7 in pure culture and ground beef samples were 7.4
×
10
4 and 8.0
×
10
5
CFU
ml
−1, respectively. The regression equation for the normalized impedance change (NIC) versus
E. coli O157:H7 concentration (
N) in ground beef samples was NIC
=
15.55
N
−
71.04 with
R
2
=
0.95. Sensitivity of the impedance biosensor was improved by 35% by concentrating bacterial cells attached to MNAC in the active layer of IDAM above the surface of electrodes with the help of a magnetic field. Based on equivalent circuit analysis, it was observed that bulk resistance and double layer capacitance were responsible for the impedance change caused by the presence of
E. coli O157:H7 on the surface of IDAM. Surface immobilization techniques, redox probes, or sample incubation were not used in this impedance biosensor. The total detection time from sampling to measurement was 35
min. |
---|---|
ISSN: | 0956-5663 1873-4235 |
DOI: | 10.1016/j.bios.2006.08.030 |