Rapid assessment of lamp spectrum to quantify ecological effects of light at night

For many decades, the spectral composition of lighting was determined by the type of lamp, which also influenced potential effects of outdoor lights on species and ecosystems. Light‐emitting diode (LED) lamps have dramatically increased the range of spectral profiles of light that is economically viable for outdoor lighting. Because of the array of choices, it is necessary to develop methods to predict the effects of different spectral profiles without conducting field studies, especially because older lighting systems are being replaced rapidly. We describe an approach to predict responses of exemplar organisms and groups to lamps of different spectral output by calculating an index based on action spectra from behavioral or visual characteristics of organisms and lamp spectral irradiance. We calculate relative response indices for a range of lamp types and light sources and develop an index that identifies lamps that minimize predicted effects as measured by ecological, physiological, and astronomical indices. Using these assessment metrics, filtered yellow‐green and amber LEDs are predicted to have lower effects on wildlife than high pressure sodium lamps, while blue‐rich lighting (e.g., K ≥ 2200) would have greater effects. The approach can be updated with new information about behavioral or visual responses of organisms and used to test new lighting products based on spectrum. Together with control of intensity, direction, and duration, the approach can be used to predict and then minimize the adverse effects of lighting and can be tailored to individual species or taxonomic groups. GRAPHICAL ABSTRACT The intersection of response curves and lamp spectra describes potential impacts of nighttime lighting on insects, sea turtles, Newell's Shearwater, and juvenile salmon, as well as their average, compared with equal brightness in lux of daylight (D65; 6500K) within the range 350–780 nm.