Functional graphene oxide membrane preparation for organics/inorganic salts mixture separation aiming at advanced treatment of refractory wastewater

Some refractory organic matters or soluble microbial products remained in the effluents of refractory organic wastewater after biological secondary treatment and need an advanced treatment before final disposal. Graphene oxide (GO) was known to have potential to be the next generation membrane material. The functional organics/inorganic salts separation GO membrane preparation and application in wastewater advanced treatment could reduce energy or chemicals consumption and avoid organics/inorganic salts mixed concentrate waste problems after nanofiltration or reverse osmosis. In this study, we developed a novelty GO membrane aiming at advanced purification of organic matters in the secondary effluents of refractory organic wastewater and avoiding the organics/inorganic salts mixed concentrate waste problem. The influence of preparation conditions including pore size of support membrane, the number of GO layers and the applied pressure was investigated. It was found that for organics/inorganic salts mixture separation membrane preparation, the rejection and flux would achieve balance for the support membrane at a pore size of ~0.1μm and the number of GO layers of has an optimization value (~10 layers). A higher assemble pressure (~10bar) contributed to the acquisition of a higher rejection efficiency and lower roughness membrane. This as prepared GO membrane was applied to practical secondary effluent of a chemical synthesis pharmaceuticals wastewater. A good organic matter rejection efficiency (76%) and limited salt separation (