Direct-current triboelectricity generation by a sliding Schottky nanocontact on MoS2 multilayers

The direct conversion of mechanical energy into electricity by nanomaterial-based devices offers potential for green energy harvesting 1 – 3 . A conventional triboelectric nanogenerator converts frictional energy into electricity by producing alternating current (a.c.) triboelectricity. However, this approach is limited by low current density and the need for rectification 2 . Here, we show that continuous direct-current (d.c.) with a maximum density of 10 6 A m −2 can be directly generated by a sliding Schottky nanocontact without the application of an external voltage. We demonstrate this by sliding a conductive-atomic force microscope tip on a thin film of molybdenum disulfide (MoS 2 ). Finite element simulation reveals that the anomalously high current density can be attributed to the non-equilibrium carrier transport phenomenon enhanced by the strong local electrical field (10 5 −10 6 V m −2 ) at the conductive nanoscale tip 4 . We hypothesize that the charge transport may be induced by electronic excitation under friction, and the nanoscale current−voltage spectra analysis indicates that the rectifying Schottky barrier at the tip–sample interface plays a critical role in efficient d.c. energy harvesting. This concept is scalable when combined with microfabricated or contact surface modified electrodes, which makes it promising for efficient d.c. triboelectricity generation. A large triboelectric direct current can be generated via the nanoscale sliding friction of a conductive-AFM tip on a MoS 2 thin film.