Degradation of a commercial textile biocide with advanced oxidation processes and ozone
The occurrence of significant amounts of biocidal finishing agents in the environment as a consequence of intensive textile finishing activities has become a subject of major public health concern and scientific interest only recently. In the present study, the treatment efficiency of selected, well...
Gespeichert in:
Veröffentlicht in: | Journal of environmental management 2007, Vol.82 (2), p.145-154 |
---|---|
1. Verfasser: | |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The occurrence of significant amounts of biocidal finishing agents in the environment as a consequence of intensive textile finishing activities has become a subject of major public health concern and scientific interest only recently. In the present study, the treatment efficiency of selected, well-known advanced oxidation processes (Fenton, Photo-Fenton, TiO
2/UV-A, TiO
2/UV-A/H
2O
2) and ozone was compared for the degradation and detoxification of a commercial textile biocide formulation containing a 2,4,4′-trichloro-2′-hydroxydiphenyl ether as the active ingredient. The aqueous biocide solution was prepared to mimic typical effluent originating from the antimicrobial finishing operation (BOD
5,o⩽5
mg/L; COD
o=200
mg/L; DOC
o (dissolved organic carbon)=58
mg/L; AOX
o (adsorbable organic halogens)=48
mg/L; LC
50,o (lethal concentration causing 50% death or immobilization in
Daphnia magna)=8% v/v). Ozonation experiments were conducted at different ozone doses (500–900
mg/h) and initial pH (7–12) to assess the effect of ozonation on degradation (COD, DOC removal), dearomatization (UV
280 and UV
254 abatement), dechlorination (AOX removal) and detoxification (changes in LC
50). For the Fenton experiments, the effect of varying ferrous iron catalyst concentrations and UV-A light irradiation (the Photo-Fenton process) was examined. In the heterogenous photocatalytic experiments, Degussa P25-type TiO
2 was used as the catalyst and the effect of reaction pH (3, 7 and 12) and H
2O
2 addition on the photocatalytic treatment efficiency was examined. Although in the photochemical (i.e. Photo-Fenton, TiO
2/UV-A and TiO
2/UV-A/H
2O
2) experiments appreciably higher COD and DOC removal efficiencies were obtained, ozonation appeared to be equally effective to achieve dearomatization (UV
280 abatement) at all studied reaction pH. During ozonation of the textile biocide effluent, AOX abatement proceeded significantly faster than dearomatization and was complete after 20
min ozonation (267
mg O
3). On the other hand, for complete detoxification, ozonation had to be continued for at least 30
min (corresponding to 400
mg O
3). Effective AOX and acute toxicity removal was also obtained after heterogeneous photocatalytic treatment (TiO
2/UV-A and TiO
2/UV-A/H
2O
2). The Fenton-based treatment experiments and particularly the dark Fenton reaction resulted in relatively poor degradation, dearomatization, AOX and acute toxicity removals. |
---|---|
ISSN: | 0301-4797 1095-8630 |
DOI: | 10.1016/j.jenvman.2005.12.021 |