Assessment of Contaminant Retention in Constructed Wetland Sediments

The A‐01 wetland treatment system (WTS) was designed to remove metals from an industrial effluent at the Savannah River Site, Aiken, SC. Sequential extraction data were used to evaluate remobilization and retention of Cu, Pb, Zn, Mn, and Fe in the wetland sediment. Remobilization of metals was determined by the Potentially Mobile Fraction (PMF) and metal retention by the Recalcitrant Factor (RF). The PMF, which includes water soluble, exchangeable, and amorphous oxides fractions, is the contaminant fraction that has the potential to enter into the mobile aqueous phase under fluctuating environmental conditions. PMF values were low for Cu, Zn, and Pb (13–27 %) and high for Fe and Mn (62–70 %). The RF, which includes crystalline oxides, sulfides or silicates and aluminosilicates, is the ratio of strongly bound fractions to the total concentration of elements in sediment. RF values ranged from 73–87 % for Cu, Zn, and Pb, indicating high retention in the sediment and from 30–38 % for Fe and Mn, indicating low retention. Contaminant retention, which is determined by solid phase metal speciation, determines the potential mobility and bioavailability of captured metals in wetland sediments; hence, their likelihood of being released if chemical, physical, or biological conditions within the wetland change. Research on constructed wetlands emphasizes contaminant removal from the aqueous to the solid phase. A related issue of overlooked importance is the strength with which contaminants removed from treated water are bound to wetland sediments. Two constructs developed from sequential extraction data useful for summarizing contaminant retention and potential remobilization are presented.