Dependence of nonlinear ultrasonic characteristic on second-phase precipitation in heat-treated Al 6061-T6 alloy

•The nonlinear ultrasonic characteristic in heat-treated Al 6061-T6 was investigated.•The nonlinearity parameter and the yield strength were measured for aged specimens.•The nonlinearity parameter and yield strength showed an interesting correlation.•The variation of nonlinearity parameter was explained by the precipitation sequence.•The nonlinearity parameter can be used to obtain the maximum strength of Al 6061-T6. It is well known that nonlinear ultrasound is sensitive to certain microstructural features in materials such as dislocations and precipitates. This paper investigates the dependence of the nonlinear ultrasonic characteristic on MgnSim precipitation in heat-treated Al 6061-T6 alloy specimens. The specimens were heat-treated at a constant temperature of 220°C for different exposure times up to 6000min. The accuracy of the ultrasonic measurement setup that determines the absolute ultrasonic nonlinearity parameter βu was first validated. The nonlinearity parameter and the yield strength were measured for each of the artificially aged specimens. The experimental results show fluctuations in the nonlinearity parameter and yield strength over the aging time, but with an interesting correlation between the nonlinearity parameter and the yield strength over the aging time. Microstructural observations confirmed that those fluctuations are due to the formation and evolution of precipitates that occurs in a unique precipitation sequence in this alloy. These results suggest that the nonlinear ultrasonic measurement can be useful for monitoring second phase precipitation and related mechanical properties in the Al 6061-T6 alloy.