Effect of MoO3 on vanadium based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

The selective catalytic reduction （SCR） activities of the MoO3 doped V/WTi catalysts prepared by the incipient wetness impregnation method at low temperature were investigated. The results showed that the addition of MoO3 could enhance the NOx conversion at low temperature and the best SCR activity was obtained when the dosage of MoO3 reached 5 wt.%. The NH3-TPD and DRIFTS experiments indicated that the addition of MoO3 changed the type and number of acid sites on the surface of catalysts and reaction activities of acid sites were altered at the same time. The redox capacity and amount of active oxygen species got improved for V3Mo5/WTi catalyst, which could be confirmed by the H2-TPR and transient response experiments. Water vapor inhibited the NOx conversion at low temperature. Deposition of ammonium sulfate or bisulfate might be main reason for the loss of catalytic activity in the presence of SO2 at low temperature. Choosing the suitable NH3/NO ratio and elevation of reaction temperature both could weaken the influence of SO2 on the SCR activity of the V3MoSAFTi catalyst. Thermal treatment of the deactivated catalyst at 350℃ could get the low temperature activity recovered. The decrease of GHSV improved the deNOx efficiency at low temperature and we speculated that the rational technological process and operation parameters could contribute to the application of this kind of catalysts in real industrial environment.