Analytical study of a-Si:H/c-Si thin heterojunction solar cells with back surface field
In this paper, the high efficiency TCO-n(aSi:H)-i(aSi:H)-p(c-Si)- p + (aSi:H) heterojunction with intrinsic thin-layer (HIT) solar cell is analyzed. The effects of the intrinsic thin-layer and the back surface field (BSF) on the photovoltaic parameters of thin solar cells are discussed. The analytic...
Gespeichert in:
Veröffentlicht in: | Journal of computational electronics 2016-03, Vol.15 (1), p.269-276 |
---|---|
Hauptverfasser: | , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | In this paper, the high efficiency TCO-n(aSi:H)-i(aSi:H)-p(c-Si)-
p
+
(aSi:H) heterojunction with intrinsic thin-layer (HIT) solar cell is analyzed. The effects of the intrinsic thin-layer and the back surface field (BSF) on the photovoltaic parameters of thin solar cells are discussed. The analytical results show that the intrinsic layer inserted at the a-Si:H/c-Si interface decreases the density of interface states. If the interface state density is lower than
10
11
cm
-
2
in the presence of an intrinsic thin layer a-Si:H, the effect of recombination current density on the photovoltaic parameters becomes low. The BSF formed by hydrogenated amorphous silicon layer can increase the conversion efficiency by about 2.6 % and the open-circuit voltage to
∼
80 mV as compared to the HIT solar cell wherein the BSF is realized by crystalline silicon. The results obtained from the simulation studies are in good agreement with the literature, and might open promising opportunities for enhancing the design parameters of HIT cells. |
---|---|
ISSN: | 1569-8025 1572-8137 |
DOI: | 10.1007/s10825-015-0756-3 |