Synthesis of poly(glycolic acids) via solution polycondensation and investigation of their thermal degradation behaviors

Polyglycolic acid (PGA) was successfully synthesized via solution and melt/solid polycondensations. PGA was synthesized by solution polymerization under vacuum by using diphenylsulfone as solvent and methanesulfonic acid as catalyst and the inherent viscosity of resultant PGA was 0.2 d l /g. The intrinsic viscosity was obtained up to 0.35 d l /g of the PGA synthesized by melt/solid polycondensation. Whereas, PGA synthesized by longer hours of SSP was insoluble in most of the known solvents, which might have higher molecular weight as well as crystallinity. Crystallographic structure of PGA was confirmed by XRD and the resulting PGA polymer was similar in thermal degradation to that of commercially available polyglycolide (Kuredux), synthesized by ring opening polymerization. Both PGAs were characterized for thermal decomposition kinetic studies using thermaogravimetric analysis (TGA), to investigate the effect of end-group and molecular weight on thermal degradation behavior. TGA was performed at 6 different heating rates from 5 to 50 °C/min and data was analyzed by three different approaches to obtain activation energy. Activation energy from Kissinger’s approach was 112 kJ/mol for lab synthesized PGA and 119 kJ/mol for Kuredux, whereas from Flynn and Wall’s method, it was observed as 115 kJ/mol and 121 kJ/mol for solution-polymerized PGA and Kuredux respectively and activation energies calculated from dynamic experiment method was also comparable of both PGAs. From dynamic experiment method linearity curve starts as low as 1 % decomposition and continues as high as 97 % with decomposition temperature ranges 219 to 380 °C for PGA and 230 to 406 °C for Kuredux. Consequently, Kissinger’s method, Flynn and Walls method and the dynamic experiment method reveal that the thermal decomposition behavior of polyglycolic acids and polyglycolide is similar, regardless of end groups and synthetic routes which is supposed to be random chain cession.