Efficient Semitransparent Solar Cells with High NIR Responsiveness Enabled by a Small‐Bandgap Electron Acceptor

Inspired by the remarkable promotion of power conversion efficiency (PCE), commercial applications of organic photovoltaics (OPVs) can be foreseen in near future. One of the most promising applications is semitransparent (ST) solar cells that can be utilized in value‐added applications such as energy‐harvesting windows. However, the single‐junction STOPVs utilizing fullerene acceptors show relatively low PCEs of 4%–6% due to the limited sunlight absorption because it is a dilemma that more photons need to be harvested in UV–vis–near‐infrared (NIR) region to generate high photocurrent, which leads to the significant reduction of device transparency. This study describes the development of a new small‐bandgap electron‐acceptor material ATT‐2, which shows a strong NIR absorption between 600 and 940 nm with an Egopt of 1.32 eV. By combining with PTB7‐Th, the as‐cast OPVs yield PCEs of up to 9.58% with a fill factor of 0.63, an open‐circuit voltage of 0.73 V, and a very high short‐circuit current of 20.75 mA cm−2. Owing to the favorable complementary absorption of low‐bangap PTB7‐Th and small‐bandgap ATT‐2 in NIR region, the proof‐of‐concept STOPVs show the highest PCE of 7.7% so far reported for single‐junction STOPVs with a high transparency of 37%. A small‐bandgap electron acceptor, ATT‐2, is designed and synthesized. By combining PTB7‐Th donor, the power conversion efficiencies reach 9.58% and 7.74% for opaque and semitransparent devices, respectively. The highest PCE among single‐junction STOPVs can be attributed to the beneficial complementary near‐infrared absorption of the low‐bandgap donor and small‐bandgap acceptor. Non‐fullerene acceptors are thus very promising for the development of high‐performance STOPVs.