Mineralogical composition and ash geochemistry of raw and beneficiated high sulfur coals

Coal is one of the most available energy sources on earth. The mineralogical and geo-chemical aspects of coals are of prime importance for their utilization. The mineralogical composition, ash chemistry, and ash fusion temperature (AFT) ranges of raw and beneficiated coals are investigated in this paper. Further, the mineral matter transformation during the beneficiation processes viz. by oxidative desulfurization; alkali extraction and ultrasonication along with the relationship of the ash fusion temperature (AFT) ranges with the ash components in the coal are discussed. The major oxides present in the coal and beneficiated coal ashes include Fe 2 O 3 , Al 2 O 3 , SiO 2 , CaO, and MgO, which significantly affect the ash fusion temperature ranges. Initial deformation temperature (IDT) changes with the ash components and, increases with the increase in the Fe 2 O 3 content in coal ash. With increasing concentrations of both Al 2 O 3 and SiO 2 , the initial deformation temperature (IDT) also increases. The increasing and decreasing nature of the initial deformation temperature (IDT) observed is also dependent upon the CaO and MgO contents. XRD analysis of the coal samples revealed significant changes in mineral matter contents with the types of beneficiation processes adopted for coal. The minerals like chlorite, illite, montmorillonite, pyrite, calcite, aragonite, and alumina have been removed during the beneficiation processes. The FTIR spectra also indicate the presence of minerals like gypsum (G), calcite (C) aragonite (Ar), quartz (Q) and kaolinite (K) in the raw coal and their subsequent removal after the beneficiation processes.