A simple approach to fabricate the rose petal-like hierarchical surfaces for droplet transportation

[Display omitted] •A straightforward approach is proposed to fabricate sticky superhydrophobic surfaces.•The approach is remarkably simple and cost-effective.•The prepared sticky superhydrophobic surfaces are shown in the application of droplet transportation. Precise transportation of liquid microdroplets is a great challenge in the microfluidic field. A sticky superhydrophobic surface with a high static contact angle (CA) and a large contact angle hysteresis (CAH) is recognized as the favorable tool to deal with the challenging job. Some approaches have been proposed to fabricate such surface, such as mimicing the dual-scale hierarchical structure of a natural material, like rose petal. However, the available approaches normally require multiple processing steps or are carried out with great expense. In this study, we report a straightforward and inexpensive method for fabricating the sticky superhydrophobic surfaces. The fabrication relies on electroless galvanic deposition to coat the copper substrates with a textured layer of silver. The whole fabrication process is carried out under ambient conditions by using conventional laboratory materials and equipments, and generally take less than 15min. Despite the simplicity of this fabrication method, the rose petal-like hierarchical structures and the corresponding sticky superhydrophobic wetting properties were well achieved on the artificial surfaces. For instance, the surface with a deposition time of 10s exhibits the superhydrophobity with a CA of 151.5°, and the effective stickiness with a CAH of 56.5°. The prepared sticky superhydrophobic surfaces are finally shown in the application of droplet transportation, in which the surface acts as a mechanical hand to grasp and transport the water droplet.