Coupled CFD-DEM simulation of hydrodynamic bridging at constrictions
•Coupled CFD-DEM to model jamming of neutral monodisperse particulate suspensions.•There exists a critical particle volume concentration ϕ* for spontaneous bridging.•ϕ* depends dimensionless outlet size, inlet size and flow geometry.•Jamming probability increases with flow velocity and particle-flui...
Gespeichert in:
Veröffentlicht in: | International journal of multiphase flow 2016-09, Vol.84, p.245-263 |
---|---|
Hauptverfasser: | , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | •Coupled CFD-DEM to model jamming of neutral monodisperse particulate suspensions.•There exists a critical particle volume concentration ϕ* for spontaneous bridging.•ϕ* depends dimensionless outlet size, inlet size and flow geometry.•Jamming probability increases with flow velocity and particle-fluid density ratio.
This paper presents a coupled CFD-DEM approach to simulate the flow of particulate suspensions in the intermediate concentration regime where solid volume concentration is 1% < ϕ < 50%. In particular, hydrodynamic multi-particle bridging during flow through a single constriction in a rectangular channel is studied. It is shown that for neutrally buoyant, monodispersed particulate suspensions, the probability of jamming increases with the particle concentration. There also exists a critical particle concentration (ϕ*) for spontaneous bridging, which depends on the ratio of pore size to particle size, the flow velocity, the particle-fluid density contrast, and the flow geometry leading to the constriction. The ϕ* has a strong dependence on the outlet-to-particle relative size (Ro). For 1.5 ≤ Ro ≤ 2.5, a direct transition from a flowing state to a jammed state was observed. For Ro ≥ 3, the flowing state typically transitioned to a dense state characterized by the accumulation of particles near the constriction before jamming. Increasing the inlet-to-particle relative size (Rip) lowers ϕ* by increasing the number of particles arriving at the constriction simultaneously. The effect of changing Rip is more pronounced at high Ro when the probability of bridging is lower. A high fluid velocity increases particle interactions near the constriction and accelerates the onset of bridging. However, no distinct effect of velocity on ϕ* was observed in this study. A higher particle-to-fluid density ratio (ρp/ρf) increases the probability of bridging and leads to a lower ϕ* in a given constriction geometry. The effect saturates at higher ρp/ρfwhen gravitational forces completely dominate over viscous drag forces. ϕ* is also found to decrease with increasing angle of constriction convergence (θ) for θ < 30°, but increases beyond that at θ=60∘. |
---|---|
ISSN: | 0301-9322 1879-3533 |
DOI: | 10.1016/j.ijmultiphaseflow.2016.05.001 |