Dislocation-mediated strain hardening in tungsten: Thermo-mechanical plasticity theory and experimental validation

A self-consistent thermo-mechanical model to study the strain-hardening behavior of polycrystalline tungsten was developed and validated by a dedicated experimental route. Dislocation–dislocation multiplication and storage, as well dislocation-grain boundary (GB) pinning were the major mechanisms underlying the evolution of plastic deformation, thus providing a link between the strain hardening behavior and material's microstructure. The microstructure of the polycrystalline tungsten samples has been thoroughly investigated by scanning and electron microscopy. The model was applied to compute stress–strain loading curves of commercial tungsten grades, in the as-received and as-annealed states, in the temperature range of 500–1000°C. Fitting the model to the independent experimental results obtained using a single crystal and as-received polycrystalline tungsten, the model demonstrated its capability to predict the deformation behavior of as-annealed samples in a wide temperature range and applied strain. The relevance of the dislocation-mediated plasticity mechanisms used in the model have been validated using transmission electron microscopy examination of the samples deformed up to different amounts of strain. On the basis of the experimental validation, the limitations of the model are determined and discussed. [Display omitted] •Thermo-mechanical behavior of polycrystalline tungsten is studied.•Microstructure is characterized for as-received, annealed and deformed tungsten.•Crystal plasticity model is used to study stress-strain and microstructural responses.•Theoretical results match well with experimental data.