Properties of magnesium silicate hydrates (M-S-H)
Investigations of synthetic magnesium silicate hydrate (M-S-H) samples have shown that M-S-H aged for 1year can exhibit variable compositions with molar Mg/Si ratios in the range 0.7≤Mg/Si≤1.5. At lower Mg/Si ratio, additional silica is present whereas brucite is observed for Mg/Si≥1.3. FT-IR and 29...
Gespeichert in:
Veröffentlicht in: | Cement and concrete research 2016-01, Vol.79, p.323-332 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Investigations of synthetic magnesium silicate hydrate (M-S-H) samples have shown that M-S-H aged for 1year can exhibit variable compositions with molar Mg/Si ratios in the range 0.7≤Mg/Si≤1.5. At lower Mg/Si ratio, additional silica is present whereas brucite is observed for Mg/Si≥1.3. FT-IR and 29Si NMR data reveal a high degree of silicate polymerisation, indicating the formation of silicate sheets. TGA shows the presence of bound water and of hydroxyl groups bound to Mg and as silanol groups in the M-S-H, in accord with 29Si{1H}CP/MAS and high-speed 1H NMR measurements. Raman and XRD data suggest that the M-S-H structure is related to a disordered talc precursor at low Mg/Si and to a serpentine precursor at high Mg/Si ratio. Solubility products for M-S-H phases were calculated on basis of the compositions of the aqueous solutions and a solid solution model was suggested. |
---|---|
ISSN: | 0008-8846 1873-3948 |
DOI: | 10.1016/j.cemconres.2015.10.003 |