Epipolar rectification method for a stereovision system with telecentric cameras

3D metrology of a stereovision system requires epipolar rectification to be performed before dense stereo matching. In this study, we propose an epipolar rectification method for a stereovision system with two telecentric lens-based cameras. Given the orthographic projection matrices of each camera, the new projection matrices are computed by determining the new camera coordinates system in affine space and imposing some constraints on the intrinsic parameters. Then, the transformation that maps the old image planes on to the new image planes is achieved. Experiments are performed to validate the performance of the proposed rectification method. The test results show that the perpendicular distance and 3D reconstructed deviation obtained from the rectified images is not significantly higher than the corresponding values obtained from the original images. Considering the roughness of the extracted corner points and calibrated camera parameters, we can conclude that the proposed method can provide sufficiently accurate rectification results. •We propose an epipolar rectification method for stereovision system with two telecentric lens based cameras.•The proposed method is easily reproducible and accurate.•The method can be widely applied before dense stereo matching for micro-level 3D metrology using telecentric stereo camera system.