Effects of key design parameters of tine furrow opener on soil seedbed properties

The structural parameters of tine furrow openers have significant effects on soil property of seed furrow in no-till planting, thereby affecting crop growth and yields. In order to analyze the effects of key parameters of tine furrow openers on soil properties (soil bulk density, soil water-stable aggregates (WSA), and soil disturbance) of the surface soil layer of 0-10 cm and surface straw disturbance, the tine furrow openers with different structural parameters, including cutting edge thickness, cutting edge curve, penetration clearance angle and rake angle, were designed and tested under no-till conditions. Orthogonal test and single factor test were performed to analyze the effects of different parameters. Results showed that the rake angle, cutting edge thickness and cutting edge curve had significant effects on cross-sectional area of furrow (A^sub f^) and disturbance of surface straw; the rake angle had a significant effect on soil bulk density. Soil types and operating depth had significant effects on soil disturbance caused by tine furrow openers. The concave type tine furrow opener produced the lowest soil disturbance and soil bulk density of seed furrow, the highest surface straw disturbance and the greatest content of WSA (>0.5 mm). With increasing rake angles of tine furrow opener, the width of seedbed (W^sub sb^) and the A^sub f^ decreased first and then increased, respectively, while the width of soil throw (W^sub st^) and the height of ridge (H^sub r^) increased. The W^sub sb^ and A^sub f^ created by tine furrow opener with 60° rake angle were significantly lower than that with others, respectively. The tine furrow opener with rake angle ranged from 45° to 60° created the lowest soil bulk density. As the penetration clearance angle increased, the content of WSA (>0.5 mm) decreased, but the effect of penetration clearance angle on the content of WSA (