Self-healing epoxy coatings loaded with inhibitor-containing polyelectrolyte nanocapsules

The self-healing polymer coatings containing organic corrosion inhibitors are intensively investigated as an alternative for highly toxic Cr(VI)-based systems. Protective self-healing coatings are realized by embedding “smart” containers, able to release a corrosion inhibitor under some specific conditions occurring when the corrosion process starts (e.g. on pH change) or upon a mechanical damage. In this study a system with the corrosion inhibitors (2-methylbenzothiazole (BT) and 2-mercaptobenzothiazole (MBT)) encapsulated inside the polyelectrolyte nanocapsules embedded in the water-based epoxy coatings is tested for its self-healing performance. The nanocontainers were prepared by the electrostatic adsorption of polyelectrolytes directly on the oil phase drops containing the inhibiting agent. The results for BT emulsion droplets and the mixture of BT and MBT encapsulated by docusate sodium salt/poly(diallyldimethylammonium chloride) (AOT/PDADMAC) and docusate sodium salt/poly(diallyldimethylammonium chloride)/poly(styrene sulfonate) (AOT/PDADMAC/PSS) surface complexes are presented. The X-ray Photoelectron Spectroscopy (XPS) was used to confirm the release of the inhibitor from the scratched coating. The influence of the nanocapsules on the barrier properties and self-healing performance of the epoxy coatings were tested by electrochemical impedance spectroscopy (EIS) in NaCl solution, the salt spray test (SST) according to ISO9227 and filiform corrosion test (FFT) according to EN ISO 3665. Potential blistering was rated according to EN ISO 4628-2.