Mathematical Modeling Applied to Drilling Engineering: An Application of Bourgoyne and Young ROP Model to a Presalt Case Study

Several mathematical ROP models were developed in the last five decades in the petroleum industry, departing from rather simple but less reliable R-W-N (drilling rate, weight on bit, and rotary speed) formulations until the arrival to more comprehensive and complete approaches such as the Bourgoyne...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Mathematical problems in engineering 2015-01, Vol.2015 (2015), p.1-9
Hauptverfasser: Thonhauser, Gerhard, Elmgerbi, Asad, Tamas Kutas, David, Nascimento, Andreas, Hugo Mathias, Mauro
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Several mathematical ROP models were developed in the last five decades in the petroleum industry, departing from rather simple but less reliable R-W-N (drilling rate, weight on bit, and rotary speed) formulations until the arrival to more comprehensive and complete approaches such as the Bourgoyne and Young ROP model (BYM) widely used in the petroleum industry. The paper emphasizes the BYM formulation, how it is applied in terms of ROP modeling, identifies the main drilling parameters driving each subfunction, and introduces how they were developed; the paper is also addressing the normalization factors and modeling coefficients which have significant influence on the model. The present work details three simulations aiming to understand the approach by applying the formulation in a presalt layer and how some modification of the main method may impact the modeling of the fitting process. The simulation runs show that the relative error measures can be seen as the most reliable fitting verification on top of R-squared. Applying normalization factors and by allowing a more wide range of applicable drillability coefficients, the regression could allow better fitting of the simulation to real data from 54% to 73%, which is an improvement of about 20%.
ISSN:1024-123X
1563-5147
DOI:10.1155/2015/631290