Preparation of carbon fibers from linear low density polyethylene
Carbon fibers were produced from linear low density polyethylene (LLDPE) instead of commonly used precursors, such as viscose rayon, mesophase pitch and polyacrylonitrile (PAN). Cross-linked fibers were produced at various temperatures, times and stress conditions during a sulfuric acid treatment us...
Gespeichert in:
Veröffentlicht in: | Carbon (New York) 2015-11, Vol.94, p.524-530 |
---|---|
Hauptverfasser: | , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Carbon fibers were produced from linear low density polyethylene (LLDPE) instead of commonly used precursors, such as viscose rayon, mesophase pitch and polyacrylonitrile (PAN). Cross-linked fibers were produced at various temperatures, times and stress conditions during a sulfuric acid treatment using LLDPE fibers obtained from dry-wet spinning. The effects of cross-linking were analyzed using a range of characterization techniques, such as differential scanning calorimetry, color change, fourier transform infrared spectroscopy, elemental analysis, density, scanning electron microscopy, and single filament mechanical properties. The carbonization process of cross-linked fibers was carried out at 950°C for 5min in a nitrogen atmosphere. The carbon fibers with the best mechanical properties were obtained from the cross-linked fiber with the highest tensile modulus. In particular, the carbon fibers with the best mechanical properties (tensile strength and tensile modulus of 1.65GPa and 110GPa, respectively), similar to commercial-grade carbon fiber, were obtained from the cross-linked fiber that had undergone a carbonization process with a stress of 0.25MPa after an acid treatment for 150min at 140°C and a stress of 0.26MPa. |
---|---|
ISSN: | 0008-6223 1873-3891 |
DOI: | 10.1016/j.carbon.2015.06.074 |