Grain size stability and hardness in nanocrystalline Cu-Al-Zr and Cu-Al-Y alloys

Cryogenic high energy ball milling has been used to synthesize nanocrystalline Cu-14Al, Cu-12Al-2Zr and Cu-12Al-2Y alloys by mechanical alloying. The alloys were studied with the aim of comparing the effect of substituting Y and Zr in place of Al, in Cu-Al alloys, on the grain size stability at elevated temperatures. The as-milled alloys were subjected to annealing at various temperatures between 200 and 900 degree C and the resulting grain morphology has been studied using X-ray diffraction and transmission electron microscopy. The addition of Y results in significantly reduced susceptibility to grain growth whereas in case of CuAl and CuAlZr alloys, the susceptibility to grain growth was much higher. The hardness is substantially increased due to Zr and Y addition in the as-milled CuAl powders. However, the hardness of Cu-12Al-2Zr gradually decreases and approaches that of Cu-14Al alloy after the annealing treatment whereas in case of Cu-12Al-2Y alloy, the relative drop in the hardness is much lower after annealing. Accordingly, the efficacy of grain size stabilization by Y addition at high homologous temperatures has been explained on the basis of a recent thermodynamic stabilization models.