Investigation of specimen size effects by in-situ microcompression of equal channel angular pressed copper

Micropillar compression testing was implemented on Equal Channel Angular Pressed copper samples ranging from 200nm to 10µm in side length in order to measure the mechanical properties yield strength, first load drop during plastic deformation at which there was a subsequent stress decrease with increasing strain, work hardening, and strain hardening exponent. Several micropillars containing multiple grains were investigated in a 200nm grain sample. The effective pillar diameter to grain size ratios, D/d, were measured to be between 1.9 and 27.2. Specimens having D/d ratios between 0.2 and 5 were investigated in a second sample that was annealed at 200°C for 2h with an average grain size of 1.3µm. No yield strength or elastic modulus size effects were observed in specimens in the 200nm grain size sample. However work hardening increases with a decrease in critical ratios and first stress drops occur at much lower stresses for specimens with D/d ratios less than 5. For comparison, bulk tensile testing of both samples was performed, and the yield strength values of all micropillar compression tests for the 200nm grained sample are in good agreement with the yield strength values of the tensile tests.